Our Products, Our Services

This entry table features three woods, all reclaimed from a horrible end.

The top features worm holed ash, left natural with all the imperfections, framed with beautiful, fragrant rose wood. The picture frame top will vary from piece to piece but only the most striking of  my few remaining pieces will be used to make these limited edition tables.

The base features what I call my "equestrian fence" base because it resembles the jumping fences at equestrian jumping events, and the drawers feature layered bondings of walnut, ash and rose wood to reveal a striking drawer front.

The piece body is mortisse and tenon jointed, and has beautiful hand cut box joint ends to add to the striking appeal.

The piece measures 48" wide, 20" deep and 34" tall. Its a perfect table for a tiffany lamp and the trown pottery bowl for your keys.

This table is perfect for that small, cozy corner. It features full mortisse and tenon joinery, by-way solid top and a hammered copper shelf.

This perfect arts and crafts style table comes in either african mahogany, black walnut, or quarter sawn white oak.

It measures 21" wide, 17" deep  and 30" tall, and the drawer pulls out to allow full access.

This Japanese style bar stool is completely hand made from solid maple. The rungs, rails, and legs are made with an old,  hand forged draw knife and the toolong marks are left in place. The seat, also solid maple, is hand sculpted for that warm feel that only the hand can produce and leave behind.

This stool is perfect for the new style, tall tables as well as kitchen island seating. The legs are thru mortissed into the seat to provide a very strong yet light looking base.

I produce these stools in two varieties, armed and armless,  and  I finish them in two colors, Burgundy, as shown and Black. I use only dyes so even though these stools are dark, the beautiful wood figure still shows through.

Dimensions are, 21" wide, 16" deep, and 35" tall.

This cabinet is designed for the home or office that needs a beautiful place to keep either a small T.V. and all its components or a music system with all seperate devices. The bottom shelf pulls out to allow easy installation of heavier components and the back is vented to allow the freedom of air flow.

The drawer is made deep enough for easy c/d or video storage and the space beneath the upper cabinet was made with a subwoofer of large dimensions in mind.

This piece is made from reclaimed ash, headed for the city landfill and the wood has a generous amount of spalting and curl I have never seen in ash before. All leg supports, braces and the body is made with full mortisse and tapered pin construction and the pins are made from walnut to show just a hint of pop when seen up close.

The dimensions are:21" wide, 21" deep and 65" tall.

This very limited edition bark adge table is made of solid, very beetly, ash. The legs are in my,"lady calf style" because they resemble the grace of a womans legs, and the top is left natural, showing all of natures destruction and glory in perfect balance.

The skirt is all cut from one piece of solid  ash and the drawer is cut from the middle of the skirt to show continuous harmony all around the piece.

This table is perfect for that conversation area or as a game table and goes great in an enclosed outdoor living area or that great mtn. cabin or if you just have a desire to bring a tree into your home.

Dimension are: 30" wide, 30" deep and 30" tall.

This modern classic chair features hard maple, american ash and rose wood. The upper back support is made of laminated ash and rose wood and is hand shaped for comfort. The lower back support is a trapazoid shaped inset designed for a slide in fabric cushion or leather for that masculine feel.

The seat is hand shaped maple and has bow tie rose wood accents. The legs are mortisse, tenoned, and tapered pegged for sturdy construction. The legs are in my lady calf design for elegance and are splayed forward, back and slightly to the side for terrific stableness.

This table, of solid mahogany, is very simple in design and very simple in its elegance.  The simple leg construction is adorned with a handpainted flower shape and has a center shelf that is both functional and  attractive.

This table, which measures 22"wide by 22" deep and 29" tall is perfect as that intimate game table or that accent piece in the entry way.

This unique piece is made completely from reclaimed wood. This piece stands approximately 45" tall has five drawers and a pull-out writing surface. The pulls are made of laminated walnut(reclaimed from the office walls of a local dr.) and rose wood(high school waste) The drawer fronts and the top are all from the same piece of cherry, butterflied for beauty(storm) and the drawers have solid maple bodies( tractor damage). The body is from cabinets( salvaged) and the dust frames(same cherry tree) are made with sliding dove tails and oak pins. This piece, very limited was inspired by my shop, as I needed a place to keep my fine hand tools and a place to make my invoices.